The slipper clutch: operation, advantages and characteristics

The slipper clutch: operation, advantages and characteristics

Welcome to Pistonudos.com, where you will find all the information you need about the world of motorcycles. On this occasion, we are going to talk about the slipper clutch, an essential component in high performance motorcycles. Throughout this article, we will explain what it is, how it works and what this type of clutch is for. In addition, we will provide you with visual examples through videos and specialized blogs. Let's get started!


What is the slipper clutch?

The slipper clutch, also known as the slipper clutch, is a mechanism used on performance motorcycles to prevent rear wheel lockup during sharp reductions in speed. This type of clutch allows the rear wheel to spin freely in one direction, thus preventing the bouncing effect that can occur when the clutch is quickly released.


How does the slipper clutch work?

The operation of the slipper clutch is based on a system of ramps and rollers. When the speed of the motorcycle is reduced, the slipper clutch allows slippage between the clutch plates to occur in a controlled manner. This prevents the rear wheel from locking up and causing a dangerous skid.

The slipper clutch uses a set of ramps and rollers that sit between the clutch discs. When braking force is applied to the rear wheel, the rollers travel along the ramps, allowing the clutch discs to separate slightly. This reduces the pressure on the discs and prevents the rear wheel from locking up.

What are the advantages of the slipper clutch?

The slipper clutch offers several advantages to motorcyclists, especially in sporty or track riding situations. Some of the most outstanding advantages are:



1 Greater security

The slipper clutch helps prevent rear wheel lockup during sharp reductions in speed, increasing rider safety. By avoiding the rebound effect, the risk of skidding and falls is reduced.

2. Greater stability

By preventing rear wheel lockup, the slipper clutch helps maintain motorcycle stability during downshifts. This allows the rider to maintain full control of the bike and perform more precise manoeuvres.

3. Less clutch wear

The slipper clutch reduces wear on the clutch discs, as it prevents sudden friction between them. This extends the life of the clutch and reduces the need for frequent repair or replacement.

Slipper Clutch Features

The slipper clutch has some important features that you should be aware of. Below, we mention the most relevant:

1. Sensitivity adjustment

Some slipper clutches allow you to adjust the sensitivity of the mechanism, allowing you to tailor it to your driving preferences. You can adjust the amount of slip that occurs on the clutch discs during downshifts.

2 Lightness

The slipper clutch is designed to be as light as possible, without compromising strength and durability. This helps reduce the overall weight of the motorcycle and improve its performance.

3. Easy installation

Most slipper clutches can be easily installed on most motorcycles. You will only need some basic tools and follow the manufacturer's instructions.


Frequently Asked Questions (FAQs)

1. Is the slipper clutch compatible with all motorcycles?

No, the slipper clutch is not compatible with all motorcycles. This type of clutch is mainly used in high-performance motorcycles, especially those intended for sports driving or on circuits. Before installing a slipper clutch, it is important to check if it is compatible with your motorcycle model.



2. Is any special maintenance required on the slipper clutch?

The slipper clutch does not require special maintenance, but it is advisable to follow the manufacturer's recommendations. It is important to periodically check the condition of the discs and rollers, and replace them if necessary. In addition, it is advisable to use high-quality oils and lubricants to ensure optimal clutch operation.

Conclusion

In short, the slipper clutch is an essential component in high performance motorcycles. Its main function is to prevent the rear wheel from locking during sharp reductions in speed, thus increasing the safety and stability of the rider. In addition, it reduces clutch wear and extends its useful life. If you are passionate about motorcycles and like sporty riding, consider installing a slipper clutch on your motorcycle. You will not regret!


Until next time,

The Pistonudos.com team

add a comment of The slipper clutch: operation, advantages and characteristics
Comment sent successfully! We will review it in the next few hours.

End of content

No more pages to load